![]() The EC1 handle comes with two 1/4-20 mounts that are perfect for mounting accessories such as a light, microphone or monitor. With a newly designed quick-release baseplate system, the EC1 is easy to balance without the need of any tools. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes.Ī display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode. Switch to Inverted Mode at any time by simply flipping the handle over the camera. Finally, the 3-Axis Follow Mode gives you full control allowing you to Pan, Tilt and Roll. In Pitch and Yaw-Axis Follow mode, the EC1 will follow your Pan and Tilt Movements. In Yaw-Axis Follow Mode, the EC1 will only follow your Pan movements. The EC1 features 3 different follow modes. After a few seconds, the camera will lock and hold its position until it is reset back to default. Quickly lock your camera into any position by manually pointing and holding it in any direction. The camera's composition will stay the same no matter how you move the handle. In Lock Mode, the Yaw, Pitch & Roll axis work together to keep the camera pointed in one direction. Using a 32-bit controller with a 12-bit encoder, the EC1 uses an adaptive PID algorithm to produce a reliably efficient handheld stabilizer. Sony a6300, Sony a7SII, Panasonic GH4 and the Canon 5D Mark III are just a few cameras that the EC1 can handle. With a payload range of 2-4.5 lbs, the EC1 has the ability to stabilize a wide range of today's popular DSLR and mirrorless cameras. rotating brushless motors that give you a limitless range of motion. Dual Grip Handles Feature Built-in Table Top Feet and 4x 1/4"-20 Accessory Mounts Comfort Grip Handles Help Reduce Fatigue and Loss of Grip With an innovative manual point and lock composition adjustment feature 4 Modes of operation with Auto-Inversion and an OLED status display Battery operating life of up to 20 hours with 3 rechargeable 18650 batteries Adaptive PID algorithm produces reliable stability and efficient battery life Stabilized with a 32-bit controller and a 12-bit encoder system Designed for DSLR & mirrorless cameras up to 5 lbs ![]() 3-Axis hand-held gimbal stabilizer with 360deg. The Dual Hand Grips also feature table top feet and four 1/4"-20 mounts for adding accessories such as lights, monitors and microphones. With the Dual Grip Handles the EC1 experience is improved with added stability and a reduction in arm fatigue. The Beholder EC1 is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of DSLR and Mirrorless cameras. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |